I just saw this. Might work.
Winsor
Long Beach, California, USA
Begin forwarded message:
> When my 2200 ran into the never-ending clog, I used Isopropyl Alcohol
> (91%) and a syringe. I took out all of the cartridges, moved the print
> head to the middle of the machine so any fluid fell through to the
> excess ink pads, then filled the syringe with alcohol. I shot all of
> the alcohol into the head, using a small plastic tube (model airplane
> fuel line) attached to the syringe and the male tip on the printer
> head
> where the cartridge seats in. I did this for each color. It made a big
> mess which ultimately just dried up (after I dabbed up what I could
> get
> to) - be sure to put something UNDER the printer (like newspaper)!!!
> The printer has worked FINE ever since then.
>
> CYA CLAUSE: This advice is worth the paper it is written on! No
> warranties expressed or implied. What worked for me could be a
> disaster
> for you, but then it wasn't working when you started, was it?
>
> pjs
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|