John:
Thank you for the information.
The short piece in the top slot is quite a strange sight after an OM,
where everything is sealed. In fact, I wonder how the light is kept out
along the rest of the back joints. Used a 3cm length of the OM foam
ribbon in the top slot. It stops at a small dimple.
The hinge seal was pretty much gone so I cut an OM one down to width.
Buying the extra kits from you when I did was, in retrospect, a wise idea.
Not surprising that there was a light leak. I'll run another film
through and see if all is cured.
Thank you again and best wishes,
Martin
John Hermanson wrote:
> There's a foam strip at the hinge area (approx. 46mm x 5mm x 2mm thick)
> and in the top slot just to the right of the counter-reset tab (that
> piece is about 2mm x 2mm x 30mm long)
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|