I've been experimenting based on two earlier posts (the one Iwert made
that I am replying to here, and another earlier one about firmware
display by Richard Lovison). Here's my results, for the E-1. I've
included both original posts (edited a bit) for reference. I've tried
both, see my notes after the procedures (I've obscured what may be
serial number or other identifying data). Hopefully I've made the text
lines narrow enough to not get too much weird line breakage in
transmission to the list.
A. Firmware readout on E-1 [may be the same on all
E Series bodies]:
1. Turn the E-1 on
2. Open the storage media door
3. Press down the Playback Mode button and OK
button at the same time
You will then get the firmware info displayed
on the LCD monitor.
B. More "internal info" [ALL E series bodies?]:
There's a neat little trick to know some statistics
about your E-body:
1: open the CF card door
2: press "play" and "ok" at the same time
3: press the arrows in this order: up; down; left; right
4: fully depress shutter once
5: press up arrow, and now there is magic on the screen
pressing the arrows, you can go through some pages
a: firmware details of attached goodies
b: R= shutter release count (with my camera it was
obviously reset during service), S= flashes
fired, M= pixel mapping (mapped pixels?), U= SSWF ?
At your own risk of course...
My notes:
A. Works exactly as stated. Good quick way to check
firmware updates.
B. Mostly works as stated, some details are left out.
1. The camera has to be on first (duh).
2. Steps 2 and 3 need to be accomplished in fairly
quick succession or you never get off the
firmware display by subsequent arrow button presses.
3. Each arrow direction displays a different "page"
a. Pressing UP yields "PAGE 1" which displays
(on my camera):
MU 1403
MB 1005
M3 1403
SL 2101
L 1100
F ----
Notes:
Assuming this is firmware versions, as noted in
the original message above, I'm guessing that the
first three have something to do with the body,
as 1.4 is my firmware version. No idea on "SL".
"L" appears to be Lens firmware version. I'm
betting "F" would show the Flash firmware version
were one to be mounted and powered up.
b. Pressing RIGHT displays "PAGE 2" which displays:
R 00000589
S 00000000
M 00000000
U 00000359
Notes:
I've nothing to add to the info originally
presented.
c. Pressing DOWN displays "PAGE 3":
CS
XXXXXXXXX [9 digit number, see below]
MCS
XXXXXXXXXX [10 digit number, see below]
805102
CAMID
XXXXXXXXXX [10 digit number, see below]
805102
Notes:
CS is definitely the Camera Serial as it
matches my body's serial number tag (and
that's why I haven't listed the output).
MCS and CAMID are ? As you can see above,
the second line of numbers matches in each
entry. Additionally, the first line (again,
not shown as I'm not sure of their meaning)
of each entry is *almost* identical, with
only the first number of each being different.
I'm not sure if they're to be read as one
continuous number or two, but they're listed
here as displayed.
d. Pressing LEFT displays:
D:
Notes:
And that's it. No page label, no further data.
---
Scott Gomez
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|