The error caused by the higher voltage (i.e., 1.5v instead of 1.35v) is not
linear. At higher light levels, the error is over 2 stops, at lower light
levels it's less than one stop. All the adjustments built into the OM-1's
are linear, so there is no way to correct by simply "recalibrating". Even
if you split the difference, your high and low exposures will be off a stop
or so.
> What's the idea behind the additional diode (it causes a Voltage drop, but
> is that required?) when you're recalibrate anyway?
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|