You'll have to check the archives, Dean, but that is missing the point
a little. He was working with a 50mm and a T32, I believe, and I with
a 90/2 and T28. You really need to roll your own, since your camera,
flash, film, subjective impressions, etc. are all a little different
from Gary's or mine.
Couple clues I recall. In my previous note, I said these were manual
stops on the lens with full output of the flash. In the case of the
flash it is almost certainly not full dump but half power at the most,
particularly when you are trying to relate the proper stop to a ratio
of 1:10 or closer.
Joel W.
On 10/21/05, Dean Tyler <dtyler@xxxxxxxxxxxxxx> wrote:
>
> Can you forward Gary's ratios? I like fool-proof.
>
> Dean
> -----Original Message-----
> From: Joel Wilcox [mailto:jfwilcox@xxxxxxxxx]
> Sent: Friday, October 21, 2005 8:04 AM
> To: olympus@xxxxxxxxxx
> Subject: [OM] Re: WTB T28 Calculator Panels
>
> On 10/20/05, Terry and Tracey <olympus@xxxxxxxxxxxxx> wrote:
> >
> > Ironically, I found it the exact opposite. I use fully manual with my T28
> > and am happier with the result.
> >
> > We're all different.
> >
> > Foxy
>
> Me too. Something I picked up from Gary R., who worked out the stops
> empirically for full burst at different mac ratios (although with a
> different flash, but that doesn't matter). That works well and is
> utterly fool-proof. Besides, there are no stickers for the 90/2.
>
> Joel W.
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|