Thanks Simon - appreciate the info. Will do it when I get back home.
BarryH
----- Original Message -----
From: Simon Worby <simon@xxxxxxxxxxxx>
Date: Wednesday, April 13, 2005 11:18 am
Subject: [OM] Re: 4T - wierd problem
>
> B Hinderks wrote:
>
> >> The "speed gear" was just a teeny bit out of position with the
> speed
> >> ring.
> >
> > How about sharing the info? My trusty old OM-4 is
> > exhibiting the same symptoms.
>
> I thought I had! But admit it was a bit brief.
>
> If you take the ring off where the lenses mount, the ring gear sits
> behind that. Be careful not to drop or damage the little reset
> switch on
> the left at 9 o'clock.
>
> Gently lift out the ring gear. You can see it engaged with a
> little cog
> at the bottom. Move the cog a teeny bit one way. Replace ring gear and
> lens mount ring and check the settings in the viewfinder and the
> camera's action on RED-60 and RED-B. If all OK, screw into place. If
> not, fiddle until you get it right.
>
> That's how I did it, anyway. Took about 1/4 hr in total, I suppose.
>
> Regards,
>
> Simon
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|