And the same with the rotary speed selector on the manual adaptor. Turn it
back and forward multiple times.
[If the speed is staying at 1/60 when you select Manual on the camera, this is
what happens when the camera doesn't sense the adaptor is plugged it (= open
circuit switch inside adaptor)]
good luck
Jez
----- Original Message -----
From: "John Hermanson" <omtech@xxxxxxxxx>
To: olympus@xxxxxxxxxx
Subject: [OM] Re: Questions about the OM10 Manual Adapter
Date: Fri, 1 Apr 2005 08:07:26 -0500
>
>
> Problem may be dirty selector board for manual adapter position. Try turning
> the selector from B-auto-manual adapter back and forth, over and over again.
> to (possibly) clean switch off.
>
> John Hermanson
> Camtech Photo Services, Inc.
> 21 South Lane, Huntington, NY, 11743-4714,
> 631-424-2121, www.zuiko.com
> Olympus OM Service since 1977
> <:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:>
> ----- Original Message -----
> From: "ScottGee1" <scottgee1@xxxxxxxxx>
> To: <olympus@xxxxxxxxxx>
> Sent: Thursday, March 31, 2005 10:37 PM
> Subject: [OM] Questions about the OM10 Manual Adapter
>
>
> > I was one of the fortunate few who received a Bill Barber 'OM10 Grab
> > Bag' complete with Manual Adapter.
> >
> > The camera works well in full Auto mode and Bulb.
> >
> > Following the instructions in the manual, I popped the adapter itself
> > onto the camera and set the mode dial to 'Manual Adapter'. Selector
> > Dial is set to 'On'. However, no matter which shutter speed I select
> > on the MA, the camera seems to fire at around 1/60 second.
> >
> > Am I missing something? Is a secret handshake required?
> >
> > TIA for any advice./ScottGee1
> >
>
>
> ==============================================
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|