Is the construction of this hood similar to the metal 50mm one? I seem to
recall that I had one of these unscrew at the front (the chrome ring and the
black metal body section). If the 21mm is also made this way could you
substitute the back end from a 50mm hood with a better clamp?
Dan S.
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
Of Mike
Sent: Monday, September 06, 2004 1:09 AM
To: 1 Olympus Digest
Subject: [OM] Re: Glitzy hood
>
>
>I took a needle nosed Vise-Grip pliers and leaving the
>screw in place applied some squeeze on the nut.
>
Gord, I may give that a try. The other option is finding a larger screw and
buying the proper tap, The former unlikely around here, the latter
impossible. So a proper fix makes no economic sense.
mike
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|