Hi Joe:
Yes the order is
#1. Turn off the flash
(always at number one) , then plug in the cords LOL. The cord attached to
the PB 2 is for PC Sync, it will not allow any TTL, so if you are using the
TTL cord you won't need to use this cord at all. The PB2 'M' Grip cord is
only needed if you want to use the Shutter Release Button on the PB 2,
again, if you turn the Winder off I promise it won't fire. I am pleased with
the faster cycling and versatility of the PB 2, although it is bulky it does
have a good balance and feel. Enjoy.
Gord
----- Original Message -----
From: "Joseph Ascione"
> When using the T-32 or T-20 with Power Grip 2 and Motor Winder should
> one connect both the connector attached to the Power Grip to the area
> that is about 4 o'clock on the lens mount and a TTL connector to the
> camera (at about 1 o'clock on the face of the camera) and the flash?
> Finally, also attaching the connection between the winder and the Power
> Grip 2. Is there an order to do this? I seem to get the flash to shoot
> in my face when I am inserting plugs into the power grip. Regards,Joe
>
The olympus mailinglist olympus@xxxxxxxxxx
To unsubscribe: mailto:olympus-request@xxxxxxxxxx?subject=unsubscribe
To contact the list admins: mailto:olympusadmin@xxxxxxxxxx?subject="Olympus
List Problem"
|