I just got a Tam*on 500/8. I am having trouble with expected exposures on
my OMs. I have not sent anything to the lab, but something is not right
here.
For example, when I spot meter with my OM4 and my Sekonic 508, I get vastly
different readings (the OM4 reads 2-3 stops slower than the Sekonic). Also,
with both the T-20 and the T-32, according to my OM2SP, I can't pump enough
light at 8 feet (ASA 100) to get the meter to read OK. It always says
"UNDR". This is in "AUTO" with the speed set at 1/60. Now the T-32 at 8
feet should melt the film<g>.
I believe that the A2 adapter is installed correctly (the tab is in the
notch) and this lens is supposed to be a f8 (T-stop of 9-something, but that
should not be causing all these woes).
What the heck am I doing wrong?
PS. What a dumb lens for Seattle in the winter<g>. Hand-holding at 1/2 is
not so easy with a 500mm lens! And to think I actually bought ND2 and ND4
filters for it in case there was just too damned much light!!
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|