Yeah, that's what I meant to say! ;^)
"C.H.Ling" wrote:
> It is a high frequency ferrite core transformer, no lamination, don't drill
> it :-)
>
> C.H.Ling
>
> ----- Original Message -----
> From: "Terry and Tracey" <foxcroft@xxxxxxxxxxx>
>
> > Watch out doing that. You will change the eddy current loss
> characteristics
> > of the transformer that will result in it running at a higher temperature.
> >
> > Foxy
> >
> > ----- Original Message -----
> >
> > I tested this theory a while ago. I took apart a really annoyingly buzzy
> > wall-wart, drilled a hole through the plates and put a machine screw,
> > lockwasher and bolt through it. The noise has been gone for several
> > years now. Of course, I have no idea if such a thing is possible with
> > any other transformer, let alone the one in a T32. The one I fixed had
> > an appropriate exposed area for the hole for a 4/40 machine screw.
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|