Or fill the screw holes with wax, paint, or epoxy.
tOM
On Wednesday, July 16, 2003 at 8:36
John A. Lind <olympus@xxxxxxxxxxxxxxx> wrote:
> The OM system Adaptall 2 OM adapter works well. If you have an OM-4[T]
> (uncertain about OM-3[ti]), ensure you get the newer "OL" Adaptall 2
> adapter. The old one can shear off the small reset pin on the OM-4 lens
> mount with one of its recessed flange screw heads. The newer one has the
> screw heads repositioned. No difference as far as lens itself, just the
> version of OM Adaptall 2 adapter you put on the lens. The older adapter is
> fine
> with an OM-1[n], OM-2[n] and OM-2S . . . they don't have a reset pin on the
> lens
> mounting flange. BTW, this is something to be careful about with older
> non-OEM
> lenses too. Olympus' OM Zuiko lenses are fine, regardless of when they were
> made.
...---- Abacurial Information Management Consultants ----
Tom A. Trottier, President http://abacurial.com
758 Albert St, Ottawa ON Canada K1R 7V8
N45.412 W75.714 +1 613 860-6633 fax:+1-270-596-1042
"They that can give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|