On Wednesday, July 16, 2003 at 2:58
John A. Lind <olympus@xxxxxxxxxxxxxxx> wrote:
...
> sturdy with a large, heavy flash mounted in it. I've also experimented with
> cabling from a TTL Auto Connector 4 on the camera to the upside down T20 Auto
> Connector and puting the flash's OM module in it. Haven't worked out a
> satisfactory routing of cable release, flash cables and power cable from slab
> to
> flash yet. Something always gets tangled too easily when rotating the camera
> .
> . . or the cable release from bracket handle to shutter release flops down
> behind the camera and gets in the way of the viewfinder. Still need to work
> on
> alternate setups with all the cabling. There's also a need to be very
> flexible
...
Have you thought of taping the wires down with gaffer's tape?
tOM---- Abacurial Information Management Consultants ----
Tom A. Trottier, President http://abacurial.com
758 Albert St, Ottawa ON Canada K1R 7V8
N45.412 W75.714 +1 613 860-6633 fax:+1-270-596-1042
"They that can give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|