I checked my parts lists but I don't think I have any CB1289 (new filter
ring silver edged 100 f2.8)
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: <Doggre@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 10, 2003 4:52 AM
Subject: [OM] Getting rid of engraving (was KEH Bargain = silvernose?)
>
> One method would be to carefully sand down the high spots (and ONLY the
high
> spots) where the engraving has raised the metal (220 grit if deeply
engraved,
> followed by 400 grit, or just 400 grit, if lightly engraved). Then prime,
> sand, reprime and resand as necessary until smooth and the engraving is no
longer
> obvious, then repaint. Done well with an airbrush, it should look like
new.
>
> Rich
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|