Maybe it would fit a screw mount Pentax after all. The famous table my
be wrong. I measure the OD of the threads on the lens at 41.9 mm and the
ID of the threads on the camera at 40.6. Measuring the ID on the front
of a 50/1.8 and the front of a 49mm filter, I get 48.1 and 48.2 mm and
the OD of the filter threads is 48.7. By analogy, it would appear the
lens thread is 42 mm and it may be a standard M42 thread.
"Hey", I think, "Didn't I get an off brand Pent*x screw mount lens just
for the case some time ago? Now where might that be?" Well, I found it
in the photo odds and ends drawer in the basement and guess what? The
table is wrong. This Practiflex FX is an M42 mount. Now I'm more
intrigued by this lens. It has a little dust inside, is 'T' coated and
the glass is perfect. Which Pent*x or other brand M42 screw mount camera
is most similar to an OM-1 or 2? Or simply interesting and cheap?
Looks like you wouldn't need any epoxy, Walt, so I'm sure you wouldn't
be interested :-) . Maybe you'll get it in the end, but I'm going to
mess around further.
Moose
Walt Wayman wrote:
Shame about the Jena Tessar. Send it to me and I'll epoxy it on
one of my old Spotmatic bodies, both of which still work.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|