I used to use Pliobond, though have been using Goo for years.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "Wayne Culberson" <waynecul@xxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, July 25, 2002 8:00 AM
Subject: Re: [OM] Pliobond/foam replacement
>
>
>
> I would be uneasy using a contact cement instead of a rubber cement
> (Pliobond) for some applications, specifically using contact cement for
> John Hermanson's back foam kits. I imagine that foam glued with normal
> contact cement would be much more difficult to remove subsequently than
> foam glued with rubber cement (John recommend's Pliobond).
>
> Roger Key
>
>
> I've replaced the foam in almost all of my cameras, and have put the new
> foam in place using double-sided tape, or friction fit where it works. It
> holds in place fine, and can be removed easily.
> But it won't work for holding down lifting leather. So, I have to go
looking
> for some of this rubber based cement.
> Wayne
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|