----- Original Message -----
From: "Brian Swale" <bj@xxxxxxxxxxxxxxx>
Sent: Friday, July 05, 2002 8:54 PM
Subject: [OM] ( OM ) Screens; || OMT power
> I had my 4T's circuit board replaced by the agents just after
> I bought it, and it came back with the power turned off. I took the hint.
> Power-off - press the little *reset* button and turn the reset button to
*B*.
> Power-on - turn the speed ring to 125 or anything outside the red zone.
Some sources suggest that even with the shutter speed ring set to "B", there
is still a small amount of power drain on the OM2SP and OM4Ti (and
presumably the OM3Ti too); see points (3), (4), and (6) in:
http://brashear.phys.appstate.edu/lhawkins/photo/olympus.faq.html#ques_B3
Point (6) suggests that the power drain on the "B" setting is:
0.020mA for the OM2SP
0.007mA for the OM4Ti
-- from Cy in the UK
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|