Olympus-OM
[Top] [All Lists]

Re: [OM] t32 loose foot repair questions

Subject: Re: [OM] t32 loose foot repair questions
From: "Richard Hawkins" <rhawkin3@xxxxxxxxxxxxxxx>
Date: Fri, 12 Apr 2002 17:06:05 -0400
Thanks to all for the advice. I called and ordered the part (after an
incredibly long wait on hold...40 minutes). I'll be glad to have it
available for use again .....er... maybe this is a good reason to buy
another T32! ....yes?

Rich
----- Original Message -----
From: "John Hermanson" <omtech@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Friday, April 12, 2002 1:51 PM
Subject: Re: [OM] t32 loose foot repair questions


> The foot area is made up of 2 parts. Is the foot itself loose or the piece
> with the sloping sides?  Chances are, the plastic studs inside the middle
> piece (CB2608) are cracked, so replacement would be called for. There are
> several points on the boards that can be hot with up to 200V.  Shorting
can
> not only give you a jolt but can damage the boards.  Be careful. If you
call
> Olympus, they might send you the part at no charge.
> _________________________________
> John Hermanson  www.zuiko.com
> Camtech, Olympus Sales & Service since 1977
> New OM & Used, Digital, Pearlcorders, Binoculars
> 21 South Lane, Huntington NY 11743-4714
> 631-424-2121 For Free Olympus manuals,
> please call 1-800-221-3000
> _________________________________
> ----- Original Message -----
> From: "Richard Hawkins" <rhawkin3@xxxxxxxxxxxxxxx>
> To: <olympus@xxxxxxxxxxxxxxx>
> Sent: Friday, April 12, 2002 1:10 PM
> Subject: [OM] t32 loose foot repair questions
>
>
> I have a t32 with a loose foot. Is this a common problem? Is a replacement
> foot still available? I suspect the screw holes in the foot are worn to a
> oversized state. Has anyone disassembled and replaced a foot? If so, what
> should I be aware of in attempting this repair, other than zapping myself
> from the capacitor? Thanks in advance to those that respond.
>
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz