Just tried taking off the memo frame on an old broken back -- it is quite firmly
spot-welded in place. If you want to try it, I'd first slide out the plate in
the
middle of the memo frame (press down and push out like you would a film box
end) and
remove the old leatherette. Then use a cutting wheel on a Dremel-type tool held
perpendicular to the back to slowly cut into the corners. You can "mill" off
the frame,
leaving the spot-welded tabs in place, then fill with some epoxy to smooth.
Rick Adshead wrote:
> I have a OM-1N and a OM-4 and would like to put Sparks leather on one or both
> of
> them, but here is my question. Is it possible/practical for me to pry off the
> memo
> holder on the back cover in order to get the "one piece leather look"? I
> assume that
> the leather will cover over any scars left from removing the memo holder, and
> that
> the holder is not rivited on but held with glue or spot weld. Anyone know for
> sure?
>
> Rick
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Sports - live college hoops coverage
> http://sports.yahoo.com/
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|