Cut it so its just below the level of the hole.
_________________________________
John Hermanson
Camtech, Olympus OM Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 www.zuiko.com
Call Olympus for FREE manuals!
1-800-221-3000
_________________________________
----- Original Message -----
From: "Steve Goss" <steveg3@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 15, 2002 10:51 PM
Subject: Re: [OM] Removing strap lug from Winder 1
> No, it doesn't. The strap actually continues up and is what the second
screw
> directly above holds on to. Without the strap, that whole end of the
winder is
> just waiting to twist apart.
> On the other hand, I seem to remember another thread about this a while
back.
> The other writer's solution was either to turn the strap around inside, or
just
> cut it off flush.
>
> Thanks, Steve Goss, Dallas Tx usa
>
> Michael Darling wrote:
> >
> > Does the small phillips head screw above the square strap lug on the
Winder
> > 1 do what I think it does?
> >
> > Tonight I realized my hand was too big and the 180/2.8 was too heavy.
The
> > strap lug kept digging into my palm and that was less than
comfortable...
> >
> > Thanks,
> >
> > Mike
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|