John Hudson wrote:
>
> I have compared my OM2n's built-in meter readings against those shown
> with a Sekonic L508 in both reflected and incident mode. For the
> reflected readings I used a piece of matte 18 0ray card. In subdued
> lighting the OM2n shows a 1 stop over exposure and in bright sunlight a
> 3 stop over exposure. The + / - dial on the camera is set to zero, the
> camera batteries are new and unused, and the ISO rating is the same on
> the camera and the meter. I double checked the reflected readings with
> my 4T and they matched the Sekonic readings. The camera body is clean
> and dry and has not been used for about three months.
>
> Can anyone suggest a reason why the 2n's meter should be so consistently
> inconsistent?
>
> John Hudson
> Vancouver, BC
>
>
If the camera seems to be exposing the film correctly in automatic mode
then I suspect light leaking into the viewfinder is inflating the
reading. Do you have an eyecup on the camera? By the way I have an
extra Eyecup 1
Jerry Liles
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|