Jim,
The walnut shell mixture is available anywhere that sells ammunition
reloading supplies. After de-priming the spent cartridges, you would
put the brass in a tumbling machine, along with a quantity of the walnut
shell medium. The brass comes out shiny and new! Next, you measure the
case for overall length, and check the neck of the cartridge for
thickness. The case may have to be trimmed, and/or the neck reamed to
specs. And then...
Opps! Off-topic! Okay, try this, after stripping the leatherette from
the body, place the OM in the tumbling machine along with a quantity of
walnut shell medium...
Bill Stanke
"Timpe, Jim" wrote:
>
> My previous employer used some blasting equipment that used a walnut shell
> mixture for more sensitive applications. Could be the perfect mix for OM
> body overhauls.
>
> -----Original Message-----
> From: John A. Lind [mailto:jlind@xxxxxxxxxxxx]
> Sent: Monday, December 03, 2001 5:05 AM
> To: olympus@xxxxxxxxxxxxxxx
> Subject: RE: [OM] Don't clean like this
>
> At 16:54 12/3/01, Jim Caldwell wrote:
> >A local camera repair shop suggested this technique to me. He had tried
> >it once with a Pentax. The sand blaster was set up for cleaning shrimp
> >boats. They sat the camera down on a steel pedestal and blasted away. I'm
> >not sure how it turned out - they are still looking for the camera!
> >
> >Jim Caldwell :>)
>
> Now I know how lenses get the "cleaning marks" rating sometimes found in
> ads for used ones. Could be an interesting conversion for creating "soft
> focus" lenses. I suppose you can rest assured there is zero fungus and the
> focus helical should have that brand new, very stiff feel to it.
>
> -- John
>