>> One possible pitfall (also true for off-brand lenses): if you have an
>> OM-3(Ti) or OM-4(Ti) you must make sure the tubes only have three screws
>in
>> the lens mount. If there are four, they may damage the spot reset button.
>> This can be fixed however by filling one screw hole with epoxy.
>
>It seems to me that this is also a problem with Tamron's Adaptall 2 mounts.
>Which ones are safe with an OM-4?
>
>Bruce
Generally - the later Adaptall 2's that are marked 'OL' rather than 'OM' -
one screw position was shifted to avoid the problem so there are still four
retaining screws but in an oddly spaced configuration. Better check though
- someone once claimed an OL type with button stripping powers.
AndrewF
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|