I don't think the lack of info is uncommon....especially during wartime
manufacture....records are lost or never kept.....parts are utilized from
different manufacturing runs which may have come from different
vendors.....an assembler takes a part from a different line....etc. It's
normally not very important to the manufacturer unless you needed a serial
number to match a replacement part.
Bruce Kolber
St. Petersburg, FL 33715
USA
----- Original Message -----
From: "Gary Reese" <pcacala@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, May 15, 2001 6:23 PM
Subject: Re: [OM] Flaring Fifties
> Bruce K. writes:
>
> << I thought the cutoff on the 1.4 was at 1,000,000 as opposed to
> 1,100,000 ???? >>
>
> At one time that was a number being discussed, but our collective
> knowledge grew and now we know the cutoffs I just posted for the 50mm
> f/1.4
>
> This information on coating changes is just getting figured out. The
> old timers on this List know how our knowledge grows with time. But the
> newcomers seem to be perplexed that we don't already have this mostly
> undocumented information already figured out. Stay tuned becuause we
> are always finding out more.
>
> Gary Reese
> Las Vegas, NV
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|