chipstrat@xxxxxxxxx writes:
<< I suppose that the best way to find a cutoff point
would be to use your camera until it has a failure. At
that point, take out the battery cell and at say 1
second (or 5 seconds, or whatever) after placing a
load on it (Tim suggests 7500 ohms) note the voltage
on your multimeter. >>
I suggested 750 Ohms which is still incorrect,
>> IT SHOULD HAVE BEEN 75 Ohms<<
1.5/75= 20/1000 A
or 20mA
Regards,
Tim Hughes
>>Hi100@xxxxxxx<<
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|