I have repaired a cracked foot on a T32 from the inside by keying the
plastic, using carbon fibres and epoxy resin to bridge the crack.
The sosmetic result is a near invisible repair.
Giles
Lex Jenkins wrote:
> If the shoe breaks above the locking dial, a good (if ugly) permanent
> repair could be made by forming thin metal shims to bridge the break. The
> metal bridge could be screwed and/or epoxied into place. (The screws
> would need to be short, or you'd have to check to be sure they wouldn't
> damage something inside.)
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|