epederso@xxxxxxxxxxxxxxxxxxxx writes:
<< I had always
imagined that the TTL cord socket in the t32 could only be used for in
from the camera (or multi-connector), not linked out to another flash.
>>
Eric,
The schematic shows the hot shoe is just in parallel with the
connector, so you can connect at will for either input or output.
On the other hand the high voltage connector on the BG2 is isolated
with a diode so you could not take this and use it as an output to wire it to
another flash to power them both from the BG2! It is strictly an input to
allow an external high voltage supply like the Quantum Turbo pack or Olympus
line operated supply to be used as a power source.
Tim Hughes
>>Hi100@xxxxxxx<<
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|