>You might have a problem of sticking levers. I had a similar problem
>witrh my 2S, though not as severe as you described. It was explained
to
>me, by an experienced OM repair specialist, that there were a couple
of
>levers in the base of the camera that controlled the interraction
>between the film advance and shutter fire mechanisms. If these levers
>were to stick, then the shutter would not fire and the film could be
>advanced several frames instead of only one, until eventually the
>levers get freed up and the camera returns to its normal condition.
>Using a motor drive, you might not notice if the film were advancing
>without the shutter firing, because of the noise made by the motor.
The
>problem may be caused by built-up gunk and it seems like you should
>consult a camera repairer.
>
Ah, just take the bottom cover off and give the works a good spray with
WD-40!
(duck and cover!)
Be seeing you.
Dirk Wright
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|