There is a small "quirk": the blinking light on the flash that gives the
information that the exposure was OK are not working ( or nreliable)
outside the areas I found. However, the picture may look OK anyway.
Furthermore, thsi is somewhat diffrent form camera to camera.
At 11:52 12.04.00 -0700, you wrote:
>====In the OFF position it will synconize correctly with flash if the
>exposure
>time is 1/60 or lower, for some reason it will only use TTL Auto in the OFF
>position with 25-100 ASA films (e g 1/ - 1/15), but with in AUTO
>everything works.
>Thor Øivind Jensen=====
>
>What happens if you use faster film?
>I just used mine with 200 speed film
>in the off position and everything came out fine.
>
>Charlie L.
>
>
>
>< This message was delivered via the Olympus Mailing List >
>< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
>< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
Thor Øivind Jensen
Dep of Administration and Organization Theory
Christiesgt 17
N 5014 Univ of Bergen, Norway
phone +47 55 58 21 53 (includes answering/message system)
home: +47 55 20 22 48
fax +47 55 58 98 90
mob: +47 908 47 064
Short written messages to 90847064@xxxxxxxxxxxxx
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|