Thanks everyone.
20 feet of half-inch PVC = 1.94
4 PVC 90 elbows@.18 = .72
1 old thin bedsheet = n/c
4 used safety pins = "
Result 4' X 3' light bank
Total cost $2.66
Actually, bought PVC cement, but didn't need it.
The friction fit works fine. The pipe cut easily, just saw
a groove around the perimeter (put a wrap of masking
tape around it to guide you) and snap it off.
I just hung the frame from a ceiling planter hook to try it.
Works great. Try it.
Next.. a PCV frame covered with a $1.50 foil "space blanket"
for a reflector... or am I getting too expensive here?
Rick - enlightened in VA
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|