Other Cheap Tricks:
If all you need is a white diffuser to go over the front of a T-20, T-32 or
F280 you can do it with a clean white men's handkerchief and a rubberband.
Been using that trick for years. "TTL Auto" mode will automagically
compensate even though you do lose some of the guide number.
For OM-1[n] and OM-10 users who have to use something like the T-20/T32 in
"Normal Auto" mode, make certain you don't cover up the "O" in "Olympus" on
the front where the sensor is.
If you run a T-20/T-32 in "Manual" then the rule of thumb is one stop loss
of light for each layer of handkerchief over the flash tube (YMMV).
Need a diffuser over the lens too? Use a chunk of your better half's
neutral panty hose stretched over the front of the lens.
Want a star filter? Do the same with a piece of window screen.
-- John
At 20:25 2/23/00 , Garth wrote:
>You can also make diffusers of arbitrary sizes using white PVC pipe for the
>frame with some rip-stop white nylon stretched over the frame. Formal,
>commercial implementations of this idea are the original Lightform P-22
>panel and variants, and their many imitators. I've been threatening to post
>plans for creating one of these gizmos (for a fraction of retail) for awhile
>now, but haven't had the time to sit down and make it happen. Soon, I hope.
>
>One place to look at these gizmos is here:
>
> http://www.tallyns.com/
>
>Go to their Search Engine and type in "P-22". You'll get a number of hits.
>The one marked "P-22 Lightform panels" is the one that links to images of
>the gizmo. They come in other sizes, too, and are available at places like
>B&H (although I couldn't find 'em on their website -- it's good, but not a
>comprehensive listing of what's available in their catalogue).
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|