> Guessing from the general lack of response on this, you're right, there are
> no male connectors to be had, as well as female connectors.
There is one way of getting male connectors, contact Olympus parts and ask
for a replacement male connector for the T32. I'm not sure how much it'll
cost, but if we're lucky it'll only be a few dollars. I had to replace
the male connector in the base of my T45 and the small board with the male
connector on it was only about $10. I would expect the connector alone
(as used in the T32) to be somewhat cheaper. It's worth a try, and much
easier than trying to manufacture one.
-mark
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|