I've connected 2 T-32's and 1 T-20 together via the TTL multiconnector, but
I don't think you can connect an F280 in tandem with the T-32's. I know
the T-series connectors and cables won't work with an F280, you have to use
the special F cord, and it only works from the OM-4t/3t 's hot shoe to the
flash. You can't plug the F cord into the front-mounted connector on an OM
4/3/4t/3t.
I believe that if you try to connect an F280 via shoe or F cord, coupled
with a T-32/T-20 via the T cord plugged into the OM-4/3/4t/3t front-mounted
socket, that only the F280 will fire.
To the gods, If I'm wrong please correct me. But me thinks I'm right.
Skip
At 9/29/99 02:59 PM +0200, you wrote:
Hello list,
I'd like to take advantage of all your experience once more,
Has anyone ever used an TTL multiconnector to link several OM flashes?
If so, would it work with different units, let say F280 and T32, when set
to OTF control?
Thank you.
_________________________
Dr Leopoldo Sánchez Rodríguez
Department of Forest Genetics and Plant Physiology
Swedish University of Agricultural Sciences
90183 Umeå
SWEDEN
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
-----------------------------------------------
Skip Williams
Westfield, NJ
skipwilliams@xxxxxxxxx
-----------------------------------------------
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|