Hinge foam and mirror pads are self stick, the slot foam, for longevity IMO,
should be glued in with a thin layer of brown rubber cement.
John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121
http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: W. J. Liles <wliles@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, July 22, 1999 11:17 PM
Subject: Re: [OM] New to list
> Gary Edwards wrote:
> >
> > Welcome, W.J.
> >
> > Replacement light seal foam kits are available from Paul van Tuyl,
> > www.olympusguy.com for $8.50 plus shipping or John Hermanson,
www.zuiko.com
> > can replace them for you if you don't want to do it yourself. If you do
it
> > yourself, don't glue the foam in. Friction is enough.
> >
> > What part of the country was your OM-1 stolen in? (for that matter, what
> > country?)
> >
> > Congratulations on finishing your Avid. My RV-4 is still waiting for me
to
> > build a fuselage.
> >
> > Gary Edwards
> >
>
> Thanks Gary and others who have welcomed me to the Oly list. It
> certainly is active for a corpse.
>
> If the door seals are deteriorating shouldn't the mirror bumper pads be
> turning to mush also? I'm less certain of my skills working in the
> braincase, just look at all the damage to be done there.
>
> My OM-1 was stolen in Monroe, Louisiana, I suspect by a yard maintenance
> crew. It was on a work table by the airplane (Tootie Mae) with the shop
> doors open while they were there. Next morning, when I needed it for
> some photomics at the hospital it was nowhere to be found.
>
> The RV-4 is a very nice airplane. I know of one around here and a
> friend is finally building his kit after finishing a Kitfox. I'm
> considering a VJ-22 amphibian for the next project, my wife has other
> ideas.
>
> W. J. Liles
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|