If the MD2 is winding but the film is not moving (ie the rewind knob stops
turning to indicate no physical film movement) then it could be wind clutch
problems in the motor itself.
John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121
http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: Norma Foltz <flzhgn@xxxxxxxxxxxxx>
To: <olympus-digest@xxxxxxxxxxxxxxx>; Ron Crabtree <crabtree@xxxxxxxxxxxxxx>
Sent: Tuesday, May 18, 1999 10:23 AM
Subject: [OM] Motor Drive 2 - ideas
> You might want to check the two "357" batteries inside of the motor
> drive 2
> itself at the base of the vertical grip -- I just checked mine and they
> are dead
> so I'll take them out before they leak does the light come on when you
> push
> the small button to the left of the LCD ? Try pressing those little
> buttons to the
> right of the LCD are the numbers correct for 36 exposure roll? I think
> there
> are settings that can produce the problem that you've described -- I
> hope this
> helps! -- Hank Hogan <http://www.netcom.com/~flzhgn/indexc.htm>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|