Problem: My OM-10Q is not functioning on Winder 1 or Winder 2:
John Hermanson Recently Responded - "If your 10 is not working with a Winder
1 or 2 (NOT Motor Drive 1 or 2), then it is most likely the MD switch in the
bottom of the camera is either dirty or out of adjustment. The switch does
not need modification to work with a winder."
Has anyone had a similar problem and accomplished any "at home" diagnostics
or adjustments to the MD switch ? I've taken off the plate but I don't see
any obvious cleaning to do.
Thanks,
Chip
St. Louis, MO USA
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|