I had a similar situation occur with an OM2s. It turned out to be the
metering coupling lever in the body of the camera. This is the tab typically
located on the inside of the body opening (approx. 10 o'clock position) that
adjusts the metering when you select an aperature. Try moving the tab (lens
removed) in either direction, it should come back to the original position.
Don't know if this is the same for an OM4. Good luck.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|