Hi Wayne
I did not use the 3 pin connector on the T32 at all.
I just remove the battery cover and connect to the + & - contacts.
I did look at using the 3 pin connector but I decided to take the
easy route,as you look at the diagram below the pins are
left to right....+ , - , and negative ,,,,,I THINK.
The batts I used are made by Hawker, they have a web site
a sealed lead rechargable battery,,type 2 volt,,12.5AH,,J cell.
RGds Paul
>
> Paul, I was not clear on you pin description.
>
> -----------
> | * |
> | * * |
> -----^-----
>
> as you look at the pins from the front, which are which?
>
> Wayne
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
>
Word's of Wisdom,..only make "SNAP" decisions when buying OM gear !!
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|