OK, I don't remember who posted the original questions, but here's a few
answers and if you have any more ?s, let me know.
First, don't change the connector, it works fine (I've used it on an MD2
and a winder 2)
On the winder/MD, set sw to Off when connecting the QI, then switch it
to SEQUENCE and leave it there.
Basically, use the blue switches behind the door to set the mode you're
interested in and then press the red release button to make things
happen. Eg: Press blue single, then each press of red switch takes one
shot. Eg: Press blue Interval, then use blue time set to set the
interval time. After red release sw is pressed, a single shot will be
taken at each interval time until you stop it. (Press single or sequence
or shut off the winder or ...)
Hope this helps.
george
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|