The only extra wires in the original 4 connected the flex in the top cover to
the main body flex. This was replaced with a compession fitting. Both cameras
have basically the same flex.
John
Winsor Crosby wrote:
> >Unfortunately, there are no components available separately for the 4
> >circuit. The ICs (4 of them, I think) are/were custom made for Olympus by
> >Sharp and are covered with something like epoxy after they are soldered to
> >the flex.
> >
> >John
> >http://www.zuiko.com
> >
> That is so cool. First class mechanicals and electronics.
>
> John, it seems to me when I bought my T that several articles mentioned the
> introduction of a flex circuit for the first time which was supposed to
> increase the electronics reliability. I always though that the plain 4 had
> a rigid board and lots of wires.
>
> Winsor
>
> Winsor Crosby
> Long Beach, California
> mailto:wincros@xxxxxxxxxxx
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|