John - is there a way to remove the metal plate without damaging it? The
solvents I would normally use to remove the glue (eg acetone) will dissolve
the plastic cover.
I ask this because I have two chargers which can be altered by moving the
screw for different voltages. The third looks identical and has the four
screw holes marked different voltages but nowhere for a screw to grip!
Thanks for your help, David
----------
> From: John Hermanson <omtech@xxxxxxxxx>
> To: olympus@xxxxxxxxxxxxxxx
> Subject: Re: [OM] M15V NiCad charger 1
> Date: 12 August 1998 14:55
>
> There are 2 chargers, both marked Charger 1. The one I have is
adjustable for
> voltage input. The other charger is smaller and has no adjustment for
input.
> The larger charger has 4 screws holder the case together. They are
located
> under the metal name plate which is glued on.
>
> John
>
> David Brown wrote:
>
> > Stupid question - can anyone advise me as to how to remove the cover
> > (preferably without damaging it!) from a M15V NiCad Charger 1 - this is
the
> > charger for the MotorDrive 2 unit.
> >
> > Thanks, David
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|