At 02:20 PM 8/5/98 -0700, you wrote:
>John,
>
>I use Pliobond (epoxy) quite frequently at my work. I would make sure this
>epoxy is cured completely before using the camera. Pliobond will outgas and
>the chemicals released during outgassing may affect the film quality and
>various components in the camera. Leave the camera open during the curing
>process.
>Pliobond should cure at room temperature in 24 hours. To be safe, I would
>wait a little longer.
>
Pliobond is a solvent-based 'rubber' cement, not an epoxy.
If anyone who needs it can't find it, my company sells it. Contact (no pun
intended) me off list.
Regards,
Denton Taylor
_______________________________
Photogallery at www.dentontaylor.com
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|